Wheel Service Equipment » Tire Spreaders:

• 

  15120A 10 CFM Vacuum Pump

  Call For Pricing

  Features:

  Free Air Displacement

  Intake Fitting: 1/4" and 1/2"

  MFL Oil Capacity: 16.5 oz. (488 ml)

  Motor Size: 1/2 HP

  Voltage: 115V 60 Hz

• 

  15234 1.2 CFM Vacuum Pump

  Call For Pricing

  Features:

  Free Air Displacement: 1.2 CFM

  Number Of Stages: Two

  Factory Micron Rating: 50 microns

  Intake Fitting: 1/4" MFL and 1/2" ACME

  Oil Capacity: 5 oz. (148 ml)

  Motor Size: 1/8 HP

  Voltage: 110-115V 50-60 Hz

• 

  15400 4 CFM Vacuum Pump

  Call For Pricing

  Features:

  Two Stage Design: Second stage starts pumping at a lower pressure to pull a deeper ultimate vacuum

  Offset Rotary Vanes: Our proven design creates the deep vacuum conditions needed for a thorough evacuation

  Gas Ballast: Helps keep the pump oil clean by reducing condensation of moisture

  Iso-Valve: Isolates the pump from the system with just a 1/4 turn, making it simple to measure rate of rise

  Integral Check Valve: Prevents pump oil from being sucked into the system if a power loss occurs

  Die-Cast Aluminum: Lightweight but durable

  Molded Base: Durable polycarbonate base improves pump balance and minimizes vibration

• 

  COOLTECH 17800B

  Call For Pricing

  Features:

  Refrigerant Recovery/Recycling for Multiple Refrigerants.

  Recovers, recycles, evacuates, and recharges R-12, R-134a, R-22, R-502 MP and HP blends, and many more.

  Ideal for refrigerated trailers, buses, RVs with multiple refrigerants.

  Lockout panel prevents mixing of refrigerants.

  Comes with two 50-pound tanks.

• 

  COOLTECH 34288

  Call For Pricing

  The Cool-Tech 34288 combines simple operation with superior accuracy. It recovers, recycles, evacuates, leak tests, and recharges R-134A quickly and accurately. Meets SAE J-2788 standards for accuracy: 95% refrigerant recovery and charging to +/- 1/2 oz.

• 

  COOLTECH 34788

  Call For Pricing

  The Cool-Tech 34788 combines simple operation with superior accuracy. It recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Fully automatic function lets you recover, vacuum, leak test, charge, and then walk away.

• 

  ROBINAIR-34700Z

  Call For Pricing

  Features:

  Automatic operation allows the technician to program the unit to recover, recycle, evacuate, recharge and then walk away.

  Vacuum leak test will monitor the vacuum level.

  Large 4" Diameter Gauges.

  Programmable Operation.

  Automatic Oil Drain.

  Voltage: 115 volt/60 Hz

  Refrigerant container: onboard 30 lb. vessel

  Operating range: 50-120 degrees F

  Recycling filter-drier: 43 cu. in. spin-on type

• 

  Transmission Fluid Exchanger 92500

  Call For Pricing

  Robinair's new transmission oil exchanger has the vehicle in and out of the service bay in less than 20 minutes! Our unique approach to exchanging fluid... through the transmission oil dipstick!

  Features:

  No rusty fittings to break loose.

  Easy, convenient, and no damage to other engine components.

  Exchange oil in the pan before it passes through the transmission filter.

  It cannot be hooked up backwards. Three modes of operations dipstick only, cooler line or a combination of the two!

  Exchange accuracy approximately +/ - 1/4 qt.

  32-quart supply tank; 34-quart waste tank.

  Unprecedented one-tenth quart flow metering for adding or subtracting fluid from the pan.

  Complete set of cooler line adapters for most foreign and domestic vehicles.

  Works with all types of automatic transmission fluid.

  Integral performance designed hose and tool compartment with drain.

  Top-off feature. Add or subtract in 1/10 qt. increments.

  'Low Fluid Alarm' and 'Indicator Light" to alert operator.

  'Drain Waste' feature automatically pumps used fluid from the machine into a waste oil container.

  'Drain Pan' feature drains the pan for easy filter replacement. No mess.